UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
211 Views
Registered: ‎05-03-2018

Operating system prevents the use of the JTAG.

Hello to all,
I'll tell you what the issue:

We made a first prototype using a ZCU106 board with the IP PCIe Bridge.
Having to debug one of our IPs with the use of the ILA,
it happens that the system crashes as soon as we try to connect through the JTAG.

On the ZCU106 we run Ubuntu 16.04 LTS with linux kernel 4.14.0-xilinx-v2018.2 (compiled with petalinux 2018.2).
It would seem that the presence of the operating system prevents the use of the JTAG.

Any suggestion about how to resolve this problem ?

Thanks in advance.

Best regards,
Andrea

Tags (4)
0 Kudos
4 Replies
Scholar drjohnsmith
Scholar
200 Views
Registered: ‎07-09-2009

Re: Operating system prevents the use of the JTAG.

A quick tought only here,

Are  you aware of this guide

https://www.xilinx.com/support/answers/69837.html

What happens with the Example design ( TRD ) for the board ?

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>
Explorer
Explorer
194 Views
Registered: ‎05-03-2018

Re: Operating system prevents the use of the JTAG.

Hello John,
Thanks for the quick feedback.
No I wasn't aware of that AR. Thanks for pointing me that.

I'll update this request soon.
Andrea
0 Kudos
Explorer
Explorer
162 Views
Registered: ‎05-03-2018

Re: Operating system prevents the use of the JTAG.

Hello,
Here's an update:
Regarding the problem we have wanted to specify that the JTAG works correctly.
We can open the target hardware without problems and see the ILA through the Vivado interface.
The point is that as soon as we connect to the target, the operating system that runs on the ZCU106 crashes and this prevents us from generating the traffic needed to debug our IP.
It seems that the JTAG takes control of the system whether it is connected before the board is switched on or is subsequently connected (after booting).

Any suggestion ?

Andrea

0 Kudos
Scholar drjohnsmith
Scholar
149 Views
Registered: ‎07-09-2009

Re: Operating system prevents the use of the JTAG.

sorry

 

any one else

 

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>