cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
plumj
Visitor
Visitor
833 Views
Registered: ‎07-22-2018

PCIE XDMA

Hi

I am using the XDMA ip and creating a project flow the ip's typical case, and i download driver from AR65444. However , after i set driver on Win 10 PC, I running the xdma_test.exe. It will suck at "Initiating C2H_0 transfer of 4096 bytes". It also detected XDMA AXI-ST design, but i choose the AXI-MM mode. How can i fix it?

thanks

 

0 Kudos
2 Replies
xiaohu125
Contributor
Contributor
783 Views
Registered: ‎06-13-2014

Can you see "xilinx xdma" in the host device manage?
Could you try to do:
1. press windows + R to open cmd
2. type: Bcdedit.exe -set TESTSIGNING ON
3. restart your pc
4. type xdma_test.exe in the cmd window
0 Kudos
plumj
Visitor
Visitor
747 Views
Registered: ‎07-22-2018

Hi 

Thank you for your reply and sorry for my late reply. My board is shurt down in the early.

About you reply, I had done all the steps before I run xdma_test.exe. And I modify my block design in HDL. Now it print "Failed to read from stream! 1359"

Do you know what it mean? Thank you so much

0 Kudos