UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
127 Views
Registered: ‎08-14-2018

QDMA AXI-MM timeout

Hello,

During AXI read burst transaction in QDMA AXI-MM C2H(read), timeout and so on occur. More precisely, if the AXI read burst (e.g. 64 burst for 4KB) is

responded to within a short time, CIDX is normally processed. However, if the response is received for a long time, it is assumed that the CIDX is not

handled normally due to timeout, etc. 

If this happens due to timeout, I'd like to know how to turn off the timer or change the timer setting. Or is it possible that something else is causing it?

- Vivado Tool Version : Vivado v2018.3_AR72013 

- QDMA version : v3.0

 

Thanks

0 Kudos