cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
armando
Observer
Observer
5,676 Views
Registered: ‎05-28-2011

simulation with modelsim se plus 6.5

hi all,

I want to simulate a pcie pio example design project in modelsim but when run do simulate_mti.do

this error recived: transcript1.txt (file attached)

and I add unisims_ver library but can not generate secureip library.

please help me.

thanks a lot.

armando.

0 Kudos
Reply
4 Replies
evgenis1
Advisor
Advisor
5,668 Views
Registered: ‎12-03-2007

Hi Armando,

 

# ** Error: (vopt-19) Failed to access library 'secureip' at "secureip".

# No such file or directory. (errno = ENOENT)

 

This error suggests that there is no secure IP library. It's generated using Xilinx compxlib utility.

 

 

Thanks,

Evgeni

Tags (1)
0 Kudos
Reply
armando
Observer
Observer
5,663 Views
Registered: ‎05-28-2011

Hi,

but how I generate secureip library .

1) compxlib in medelsim not work:

ModeSim>compxlib -help
# invalid command name "compxlib"

2)and in ISE 13.2 if I RUN compile HDL simulation library in design utility I received this meseges:

Signature:-
------------------------------------------------------------------------------
C:\eda\Xilinx\13.2\ISE_DS\ISE\bin\nt\unwrapped\compxlib.exe -s mti_se -l all -arch virtex5 -lib unisim -lib simprim -lib xilinxcorelib -lib edk -exclude_superseded -intstyle ise
------------------------------------------------------------------------------
ERROR:Compxlib - COMPXLIB[sim]: Unable to automatically find executables for simulator 'mti_se' from the following paths:
    C:\eda\Xilinx\13.2\ISE_DS\ISE\\lib\nt
   C:\eda\Xilinx\13.2\ISE_DS\ISE\\bin\nt
   C:\eda\Xilinx\13.2\ISE_DS\PlanAhead\bin
   C:\eda\Xilinx\13.2\ISE_DS\ISE\bin\nt
   C:\eda\Xilinx\13.2\ISE_DS\ISE\lib\nt
   C:\eda\Xilinx\13.2\ISE_DS\EDK\bin\nt
   C:\eda\Xilinx\13.2\ISE_DS\EDK\lib\nt
   C:\eda\Xilinx\13.2\ISE_DS\EDK\gnu\microblaze\nt\bin
   C:\eda\Xilinx\13.2\ISE_DS\EDK\gnu\powerpc-eabi\nt\bin
   C:\eda\Xilinx\13.2\ISE_DS\EDK\gnuwin\bin
   C:\eda\Xilinx\13.2\ISE_DS\common\bin\nt
   C:\eda\Xilinx\13.2\ISE_DS\common\lib\nt
   C:\WINDOWS\system32
   C:\WINDOWS
   C:\WINDOWS\System32\Wbem
   C:\Program Files\ATI Technologies\ATI.ACE\Core-Static
   C:\Program Files\Subversion\bin
   C:\Program Files\TortoiseSVN\bin
   C:\Program Files\Microsoft SQL Server\90\Tools\binn\.
Simulator 'mti_se' is ignored.


please help me How generate secureip library?

thanks,

armando.

0 Kudos
Reply
kotir
Scholar
Scholar
5,655 Views
Registered: ‎02-03-2010

Hi Armando,

 

You have to use compllib in ise Design suite command prompt. Not in the modelsim command prompt.

 

You can go to Start-> All Programs -> Xilinx Design Suite 13.2 -> Accessories -> ISE Design Suite Command Prompt

 

it will open a command window. You can type in the compxlib command and press Enter.

 

It will open the GUI for library compilation utility.

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------
0 Kudos
Reply
armando
Observer
Observer
5,627 Views
Registered: ‎05-28-2011

Hi,

thank you for your good help that solved my problem.

armando

0 Kudos
Reply