UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant sarmad88
Participant
3,160 Views
Registered: ‎02-11-2013

BSCANs problem

hi all

 

my design use the jtag loader and chipscope the error occur in map process  because

 

Number of BSCANs:                       2 out of       1  200% (OVERMAPPED)

 

how can overcome this error?

 

 

 

-------------------------------------------------------------------------------
If you stabbed in the back, know you are in the foreground
--------------------------------------------------------------------------------
Tags (1)
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
3,134 Views
Registered: ‎09-05-2007

Re: BSCANs problem

Based on your previous thread I’ll assume that you are using a Spartan-3E device which only has one BSCAN primitive (Spartan-3E is no longer recommended for new designs). Both Chipscope and JTAG Loader make use of BSCAN so you really need to choose which of these tools you want to use. In the KCPSM3 design flow that means selecting the appropriate ‘ROM_form’ template when assembling your programs.

 

Newer products such as Spartan-6 have multiple BSCAN blocks so this issue is encountered when working with the KCPSM6 version of PicoBlaze (released in 2010).

 

Ken Chapman
Principal Engineer, Xilinx UK
0 Kudos