cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
1,153 Views
Registered: ‎09-12-2018

[AXI4-Stream subset converter : Extra Setting problem]

Jump to solution

Hell. I am working on ZCU102 evaluation board and Vivado HLx system suite version 2018.2.(Window O.S) I used AXI4-Stream subset converter v1.1, but there is a problem.

 

According to PG085 document(AXI4-Stream Infrastructure IP Suite v1), constant elements can be used.

figure 3.png

< PG085 version 1.0, page 47>

 

 

However, I can’t use constant elements as shown in figure1. Constant elements are unsupported syntax as shown in figure2.

figure 1.png

<figure 1>

figure 2.png

<figure2 >

 

 

How can I solve this problem?

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,134 Views
Registered: ‎11-09-2015

Hi @uuoo93,

The syntax is a bit wrong in the pg085, the apostrophe is missing before the b

you need to use 4'b0000. You can refer to the TID or TKPEEP lines for reference.

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

2 Replies
Highlighted
Moderator
Moderator
1,135 Views
Registered: ‎11-09-2015

Hi @uuoo93,

The syntax is a bit wrong in the pg085, the apostrophe is missing before the b

you need to use 4'b0000. You can refer to the TID or TKPEEP lines for reference.

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

Highlighted
Visitor
Visitor
1,103 Views
Registered: ‎09-12-2018
Thank you!!
0 Kudos