cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
fincs
Adventurer
Adventurer
859 Views
Registered: ‎03-21-2016

Axi ethernet performance

Jump to solution

Hello. I'm looking for information on ethernet ethernet performance. All tests use a Zynq or Zynq UltraScale+ processor and different results.

http://www.wiki.xilinx.com/Linux+AXI+Ethernet+driver#Performance

Zynq UltraScale+ Tx 940, Rx 934

Zynq Tx 780, Rx 755

Why the kernel implemented in programmable logic depends so strongly on the software module?

No information about bandwidth in full duplex mode. This http://www.wiki.xilinx.com/Zynq+Ethernet+Performance+2015.4 links do not work.

0 Kudos
1 Solution

Accepted Solutions
fincs
Adventurer
Adventurer
517 Views
Registered: ‎03-21-2016

The core provides full performance in accordance with the Etnernet standard, if you do not use software processing or creating network packets. The processor is the slow part, so the tests have such low speeds.

Links still do not work (https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842575/Zynq+Ethernet+Performance+2015.4)

 

 

View solution in original post

0 Kudos
1 Reply
fincs
Adventurer
Adventurer
518 Views
Registered: ‎03-21-2016

The core provides full performance in accordance with the Etnernet standard, if you do not use software processing or creating network packets. The processor is the slow part, so the tests have such low speeds.

Links still do not work (https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842575/Zynq+Ethernet+Performance+2015.4)

 

 

View solution in original post

0 Kudos