cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Newbie
Newbie
560 Views
Registered: ‎03-18-2020

Block Diagram

Jump to solution

This is my reference circuit. Can u please explain what is happening in this in a sequential manner?

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
313 Views
Registered: ‎11-05-2019

Hello @C9 

If you can organize your points and post them, you'll get some useful information from the forum members.

If you don't mind, please close this thread, kudo and accept as solution.

Thank you

View solution in original post

5 Replies
Highlighted
Xilinx Employee
Xilinx Employee
470 Views
Registered: ‎11-05-2019

Hello @C9 

What is your question or purpose of this reference circuit? I think, your colleagues can explain it to you.

Thank you
Don't forget to reply, kudo, and accept as solution.

0 Kudos
Voyager
Voyager
445 Views
Registered: ‎06-20-2012

"This is my reference circuit." and you don't know what it does ??????????????

== If this was helpful, please feel free to give Kudos, and close if it answers your question ==
0 Kudos
Highlighted
Advisor
Advisor
438 Views
Registered: ‎04-26-2015

@C9 From what you've posted, the MicroBlaze processor will do something involving ethernet and a UART. That's ... about all anyone can say with the information you've provided.

 

It's sort of like someone taking a photo of a car and saying "hey, can someone tell me where this car will drive over the next two weeks?". Obviously the driver could (just like the person who designed this circuit can probably tell you what it does) - but nobody else can help.

Highlighted
Xilinx Employee
Xilinx Employee
314 Views
Registered: ‎11-05-2019

Hello @C9 

If you can organize your points and post them, you'll get some useful information from the forum members.

If you don't mind, please close this thread, kudo and accept as solution.

Thank you

View solution in original post

Highlighted
Xilinx Employee
Xilinx Employee
243 Views
Registered: ‎11-05-2019

Hello @C9 

This is just my opinion.

MicroBlaze reads the program from the Local Mempry and executes it.

MB's M_AXI_* ports are connected to several peripherals ( AXI Ethernet Lite, AXI UART Lite, BRAM Controller, and AXI Interrupt Controller ) via AXI Interconnect.

MB reads/writes registers of these peripherals and processes Ethernet communication, UART communication, and interrupts. As for BRAM, it will be able to Read/Write as memory.

You'll be able to try them out with an evaluation board and an Example Design. Please give it a try!

Thank you

0 Kudos