cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
6,396 Views
Registered: ‎01-17-2015

Can't boot linux from zybo board

Jump to solution

Hi all,

 

I have been working with zybo board and following this http://www.digilentinc.com/Data/Products/ZYBO/ZYBO-Embedded_Linux_Hands-on_Tutorial.pdf  tutorial. But I cannot seem to pass step 4 of section 5. Once I made a copy of the four files needed to the sd card, the zybo board is still not booting.

 

somebody please help.

0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Explorer
Explorer
10,666 Views
Registered: ‎02-18-2013

Hey,

you can use this Tutorial:

http://www.wiki.xilinx.com/Build+kernel

 

I have a Linux running on my Zybo. If you have any questions, you can ask me :)

View solution in original post

0 Kudos
Reply
5 Replies
Highlighted
Explorer
Explorer
10,667 Views
Registered: ‎02-18-2013

Hey,

you can use this Tutorial:

http://www.wiki.xilinx.com/Build+kernel

 

I have a Linux running on my Zybo. If you have any questions, you can ask me :)

View solution in original post

0 Kudos
Reply
Highlighted
Visitor
Visitor
6,348 Views
Registered: ‎01-17-2015

Hi Kampi,

 

Thanks for replying and now I have it up and running.

 

Next step in my project is to have opencv running on the zybo board and couldn't find a documentation on how to do so.

 

please help

0 Kudos
Reply
Highlighted
Explorer
Explorer
6,333 Views
Registered: ‎02-18-2013

Fine :)
Do you use the Xilinx RAM-Disk or a own rootfs?
Maybe it´s useful to use a rootfs for a SD-Card and not an RAM-Disk.

0 Kudos
Reply
Highlighted
Visitor
Visitor
6,323 Views
Registered: ‎01-17-2015
I am using RAM-DISK
0 Kudos
Reply
Highlighted
Explorer
Explorer
6,318 Views
Registered: ‎02-18-2013

I think that the RAM-Disk hasn´t Open CV installed.
Try this with a Xilinx Meta Layer:

 

http://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html

0 Kudos
Reply