cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
382 Views
Registered: ‎07-17-2019

Could not find pin on cell 'XADC'

Jump to solution

Hi,

I am using FPGA XC7z045. 

I am trying to connect a XADC to PL for reading on-chip temperature. I generated XADC IP (AXI stream based), and connected in my design. It successfully compiled and simulated well.

But I had the following errors during the synthesis:

INFO:  [Synth 8-113] binding component instance 'inst_xadc' to cell 'XADC'  
ERROR: [Synth 8-212] could not find pin 'm_axis_tvalid' on cell 'XADC'      
ERROR: [Synth 8-212] could not find pin 'm_axis_tready' on cell 'XADC'      
ERROR: [Synth 8-212] could not find pin 'm_axis_tdata' on cell 'XADC'       
ERROR: [Synth 8-212] could not find pin 'm_axis_tid' on cell 'XADC'         
ERROR: [Synth 8-212] could not find pin 'm_axis_aclk' on cell 'XADC'        
ERROR: [Synth 8-212] could not find pin 's_axis_aclk' on cell 'XADC'        
ERROR: [Synth 8-212] could not find pin 'm_axis_resetn' on cell 'XADC'      
ERROR: [Synth 8-212] could not find pin 'vp_in' on cell 'XADC'              
ERROR: [Synth 8-212] could not find pin 'vn_in' on cell 'XADC'              
ERROR: [Synth 8-212] could not find pin 'user_temp_alarm_out' on cell 'XADC'
ERROR: [Synth 8-212] could not find pin 'ot_out' on cell 'XADC'             
ERROR: [Synth 8-212] could not find pin 'channel_out' on cell 'XADC'        
ERROR: [Synth 8-212] could not find pin 'eoc_out' on cell 'XADC'            
ERROR: [Synth 8-212] could not find pin 'alarm_out' on cell 'XADC'          
ERROR: [Synth 8-212] could not find pin 'eos_out' on cell 'XADC'            
ERROR: [Synth 8-212] could not find pin 'busy_out' on cell 'XADC'           
ERROR: [Synth 8-285] failed synthesizing module 'misc'     

All the inputs/outputs of XADC cell could not be found. For Vp_in and Vn_in, they are propagated to the top level in my design, and in the top level xdc file, they are constrained. For the rest signals, they are all used internal. I didn't make any specific contrains for them. I don't think that is the issue.

It seems like I am missing some constrains for XADC cell itself. Is that the case? But in the generated files, I found nothing related to this issue.

I didn't find any info on the Internet. Does anybody have an idea?

Thank you very much,

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Visitor
Visitor
345 Views
Registered: ‎07-17-2019

My instance name is called xadc. Appreantly, it is not allowed. After changing the name, the issue is solved.

View solution in original post

0 Kudos
1 Reply
Highlighted
Visitor
Visitor
346 Views
Registered: ‎07-17-2019

My instance name is called xadc. Appreantly, it is not allowed. After changing the name, the issue is solved.

View solution in original post

0 Kudos