Showing results for 
Show  only  | Search instead for 
Did you mean: 
Registered: ‎10-24-2018

How could I use Microblaze in this manner?

I'm using VCU 118 eval board. 

When reading PG125 regarding AXI Traffic Generator v2.0, it says the below.

1. how do i do this?

2. Are there any example/tutorials i can follow?

3. how Would i be able to use Microblaze to control the routing on the AXI Interconnect?

The AXI Traffic Generator can be connected to an AXI-based system to stress the modules
connected to the interconnect.

Figure 1-11 shows the AXI Traffic Generator connected to a MicroBlaze™ processor. The
MicroBlaze programs the AXI Traffic Generator and the AXI Traffic Generator creates traffic
to other cores.





0 Kudos
0 Replies