cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
krunal704
Observer
Observer
630 Views
Registered: ‎02-12-2018

How to install Linux with hdmi and USB OTG driver in zc702

I have Xilinx Evaluation Board ZC702

I have installed headless linux on ZC702 with BSP which provided by Xilinx which does not install HDMI and USB drivers with OTG support

So how do i add hdmi and USB drivers in that

Any help would be helpful

Tags (3)
0 Kudos
1 Reply
stephenm
Xilinx Employee
Xilinx Employee
597 Views
Registered: ‎09-12-2007

You would need to add this in the Vivado project to your HW design, and export to SDK to create the HDF.

You would use this HDF to config your petalinux project (petalinux-config --get-hw-description=<paht to hdf>)

you can add the kernel drivers (petalinux-config -c kernel)

 

If you are using the Open Source Linux flow (ie not petalinux or Yocto), then you can follow the wiki below

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841722/ZCU102+Image+creation+in+OSL+flow

0 Kudos