cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
7,908 Views
Registered: ‎12-10-2015

How to turn on PCIe on the ZC706?

Hello!

 

I try to follow the instructions in the UG961-Manual, but instructions in the chapter "TRD Demonstration Setup" stil doesn't work.

I use Lubuntu 14.04 instead Fedora 16, but it's ok. When I use 'lspci' with inserted board in PCIe slot, I get

 

$ lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 9 Series Chipset Family USB xHCI Controller
00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1
00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0)
00:1c.2 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 3 (rev d0)
00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1
00:1f.0 ISA bridge: Intel Corporation 9 Series Chipset Family Z97 LPC Controller
00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode]
00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

and no ZC706 card.

 

quickstart.sh isn't present in the rdf0287-zc706-pcie-trd-2014-4.zip archive, and the first thing I did - try to install drivers on the host system:

$ cd ./software/host/driver
$ make
$ sudo -i
# make insert
Inserting Performance Driver
insmod: ERROR: could not insert module /home/projects/rdf0287-zc706-pcie-trd-2014-4/software/host/driver/xdma/xdma_k7.ko: File exists
/bin/mknod: missing operand after '0'
Try '/bin/mknod --help' for more information.
Makefile:32: recipe for target 'insert' failed
make: *** [insert] Error 1

 

I don't understand, why ZC706-board inserted in PCIe slot can't load in the QSPI mode and I don't know where to download quickstart.sh for the rdf0287-zc706-pcie-trd-2014-4.zip or what to do.

 

Could you help me?

 

Tags (2)
0 Kudos
2 Replies
Highlighted
Visitor
Visitor
7,901 Views
Registered: ‎12-10-2015

Re: How to turn on PCIe on the ZC706?

And how to port project from Vivado 2014.4 to Vivado 2015.3?

It's needed to do instructions in http://www.wiki.xilinx.com/ZYNQ_PCIe_TRD_2014.4
0 Kudos
Highlighted
Moderator
Moderator
7,851 Views
Registered: ‎01-15-2008

Re: How to turn on PCIe on the ZC706?

in the following link in the 2nd drop down menu you can select the vivado version you are using to get the example designs

http://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html#documentation

 

 

0 Kudos