cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
607 Views
Registered: ‎02-08-2017

IPs for Microblaze MSC

HI,

 

Is there any IP which can interface with Microblaze MSC?

I want to interface multiple UART with Microblaze MSC. As Microblaze MSC support only one UART port and IO bus port also. can i used IO bus port for interface multiple UART IP?

0 Kudos
3 Replies
Highlighted
Moderator
Moderator
550 Views
Registered: ‎07-31-2012

Hi @mohit.tomar,

 

Please try using AXI Uartlite or AXI Uart16500 IPs for the purpose to interface with MCS.

 

Regards

Praveen


-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Highlighted
Visitor
Visitor
542 Views
Registered: ‎02-08-2017

Hi Praveen, 

 

How can we interface AXI Uartlite with MCS, as MCS don't support AXI Interface?

 

Thanks.

0 Kudos
Highlighted
Moderator
Moderator
500 Views
Registered: ‎10-30-2017

Hi @mohit.tomar,

 

Please refer to this post:

https://forums.xilinx.com/t5/Embedded-Processor-System-Design/Microblaze-MCS-to-AXI-lite/td-p/662917

 

Here it's explained about Microblaze MSC to AXI lite interface using IO bus. Create a bridge IP between IO Bus and AXI lite interface.  once you created then you are free to add many peripherals like uarts, i2c, xadc, etc to your Microblaze MSC.

 

Best Regards,
Srikanth
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.

0 Kudos