cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Anonymous
Not applicable
4,908 Views

Microblaze and custom IP block

Hi,

 

I'm working on zedboard and vivado 2013.4 tool.

I have integrated a Microblaze processor into Programmable logic side (PL), 

My goal is to create a custom IP block (hardware accelerator) in the Programmable Logic (PL) portion of the Zynq-7000 device, and connect this custom IP to the Microblaze softcore.

 

Can you help me please.

Thanks in advance.

 

 

 

0 Kudos
2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
4,895 Views
Registered: ‎07-01-2010

This UG1119 has details of creating and packing the custom IP.
http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_4/ug1119-vivado-creating-packaging-ip-tutorial.pdf

UG896 has details of using the IP in the project.
http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_4/ug896-vivado-ip.pdf

Hope this helps.

Regards,
Achutha
---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------
0 Kudos
Highlighted
Scholar
Scholar
4,884 Views
Registered: ‎09-05-2011

Some info you will find interesting:
http://www.eetimes.com/document.asp?doc_id=1280680

Also, the following example will be helpful - it is on XPS but the concept can be replicated in Vivado.
http://www.xilinx.com/support/documentation/application_notes/xapp1093-amp-bare-metal-microblaze.pdf
0 Kudos