cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
499 Views
Registered: ‎10-03-2017

PS_INIT_B INIT_B relationship in MPSoC

Jump to solution

In a MPSoC I'm confused between PS_INIT_B and the fpga INIT_B signals. How are they related? For what I've read in UG1085 I understand that PS_INIT_B and INIT_B are basically the same, except that it is also related to the LBIST PS Boot sequence.

Thanks.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
437 Views
Registered: ‎09-01-2014

Re: PS_INIT_B INIT_B relationship in MPSoC

Jump to solution
they are the same since PL is controlled by the PS, so ZynqMP device calls it as PS_INIT_B.
I don’t remember there are individual PS_INIT_B and INIT_B signals from ZyqnMP device.

View solution in original post

1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
438 Views
Registered: ‎09-01-2014

Re: PS_INIT_B INIT_B relationship in MPSoC

Jump to solution
they are the same since PL is controlled by the PS, so ZynqMP device calls it as PS_INIT_B.
I don’t remember there are individual PS_INIT_B and INIT_B signals from ZyqnMP device.

View solution in original post