cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
nickh
Explorer
Explorer
606 Views
Registered: ‎03-29-2008

PS LPD switch performance when multiple masters are using the switch.

Hello All;

 

I am trying to find documentation that describes the performance of the PS LPD switch when there are multiple masters and slaves involved.  I have not been able to find anything that describes the amount of interference and performance degradation that would occur if two masters attempted simultaneous access to two slaves through the PS LPD switch.  

 

By way of a particular question that might help clarify the situation what is the performance of the data transfers if the RPU tried to access the GEM while the CSU attempts to access OCM?  Would the performance be the same in the case of sequential transfers and simultaneous transfers?  What document would discuss this?  Without actual hardware testing how would I be able to predict the performance? 

 

Thank You

Nick

0 Kudos
1 Reply
nickh
Explorer
Explorer
490 Views
Registered: ‎03-29-2008

Hello neyla12;

 

I am not sure what you are replying to but it seems completely off topic.  Generally I prefer it when the answer is to the question asked not some listing of figures having no bearing on the topic.

 

Nick

0 Kudos