cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
davidhdeze
Visitor
Visitor
3,002 Views
Registered: ‎06-29-2011

Problem with a VDMA IP Core memory Mapped

PD: attached the ImprPant of the xps

I have a problem when I do a instance of VDMA v1.1. In the Adresses tab of XPS, I view that the core BUS named C_MPMC_BASEADDR is unmapedd but in the bus interface tab or ports tab I dont see this bus.
I only have disconnected the bus XIL_RD_MGENLOCK becouse the core is configurated in XSVI interface
Note: the instance of the core in mhs file is:

BEGIN vdma

PARAMETER INSTANCE = vdma_0 

PARAMETER HW_VER = 1.01.a

PARAMETER C_BUS_INTERFACE = 1

PARAMETER C_DMA_TYPE = 1

PARAMETER C_USE_FSYNC = 1

PARAMETER C_BASEADDR = 0xcb400000 

PARAMETER C_HIGHADDR = 0xcb40ffff

PARAMETER C_READ_GENLOCK_MODE = 0

BUS_INTERFACE XIL_VFBC = vdma_0_XIL_VFBC

BUS_INTERFACE XIL_RD_XSVI_IN = timebase_0_XSVI_OUT

BUS_INTERFACE SPLB = mb_plb

PORT xsvi_rd_clk_out = vdma_video_clk 

PORT xsvi_rd_vsync_out = vdma_vsync

PORT xsvi_rd_hsync_out = vdma_hsync

PORT xsvi_rd_active_video_out = vdma_active_video

PORT xsvi_rd_data_out = vdma_data PORT IP2INTC_Irpt = vdma_0_IP2INTC_IrptEND

 

Addresses.PNG
0 Kudos
2 Replies
davidhdeze
Visitor
Visitor
3,001 Views
Registered: ‎06-29-2011

The ImprPant of Bus Interface Tab is:

BusInterface.PNG
0 Kudos
pritom
Observer
Observer
2,947 Views
Registered: ‎08-06-2010

Hi, 

Could you please let me know how did you generate this vdma core for PLB ?

Thanks 

0 Kudos