cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
330 Views
Registered: ‎03-29-2019

QEMU SDK

Hello !!

I have a question about using qemu SDK , when using qemu in sdk it emulate both PS and PL ?? or just PS ??

I am talking about qemu provided by sdk not the one from petalinux or building from source.

 

THANKS

0 Kudos
4 Replies
Highlighted
Moderator
Moderator
320 Views
Registered: ‎09-12-2007

The QEMU in SDK/XSCT would be the same as the one in petalinux, or built from sources.

You can emulate IP in the PS and the PL. If you want to emulate the IP in the PL, then you can use a co-simulation

with the Vivado simulator.

 

0 Kudos
Highlighted
Contributor
Contributor
308 Views
Registered: ‎03-29-2019

Thanks, what do you mean by cosimulation with vivado simulator ? is that a cosimulation with qemu , and if it is the case , do you have a document or a link that i can follow to see that. thanks a lot

0 Kudos
Highlighted
Moderator
Moderator
300 Views
Registered: ‎09-12-2007

0 Kudos
Highlighted
Contributor
Contributor
285 Views
Registered: ‎03-29-2019

hi @stephenm ,

I already did this example , now i have a simple adder example written in systemc/tlm , the example is for the zynq 7000, i am trying use the systemc-cosim-demo to add  the adder but still not acheiving the goal, so can you advice me how to do that , may be you have some ideas that i can follow or search ? thanks a lot

0 Kudos