I'm using VCU 118 eval board.
When reading PG125 regarding AXI Traffic Generator v2.0, it says the below.
1. how do i do this?
2. Are there any example/tutorials i can follow?
3. how Would i be able to use Microblaze to control the routing on the AXI Interconnect?
The AXI Traffic Generator can be connected to an AXI-based system to stress the modulesconnected to the interconnect.
Figure 1-11 shows the AXI Traffic Generator connected to a MicroBlaze™ processor. TheMicroBlaze programs the AXI Traffic Generator and the AXI Traffic Generator creates trafficto other cores.