cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
2,806 Views

Vivado 2014.3 生成的Boot.bin不能启动

Jump to solution

我有一个ZYNQ 7020的设计以前是在ISE14.5上做的,生成的BOOT.bin能正常运行。但是我把设计移到Vi​vado 2014.3上后(流程按照手册正常操作的),生成的BOOT.bin不能启动。我将SDK的fsbl​_debug.h文件中的FSBL_DEBUG_INFO 定义后,串口的打印输出入下:(SD卡启动)

Xilinx First Stage Boot Loader
Release 2014.3  Oct 28 2014-10:39:59
Devcfg driver initialized
Silicon Version 3.1
Boot mode is SD
SD: rc= 0
SD: Unable to open file BOOT.BIN: 1
                                   SD_INIT_FAIL
FSBL Status = 0xA009

This Boot Mode Doesn't Support Fallback
In FsblHookFallback function

 

期待您的答案!Thanks!

0 Kudos
Reply
1 Solution

Accepted Solutions
norman_wong
Scholar
Scholar
3,555 Views
Registered: ‎05-28-2012

I've met with the same problem. Are you using an older SD card? I found that my old 1GB failed and my slightly newer 4GB card succeeds.

View solution in original post

0 Kudos
Reply
2 Replies
norman_wong
Scholar
Scholar
3,556 Views
Registered: ‎05-28-2012

I've met with the same problem. Are you using an older SD card? I found that my old 1GB failed and my slightly newer 4GB card succeeds.

View solution in original post

0 Kudos
Reply
Anonymous
Not applicable
2,771 Views

Hi,

 

Yes ! The problem got solved. 

 

Thanks for your help!

0 Kudos
Reply