cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
4,709 Views
Registered: ‎05-05-2008

Windows Hyperterminal - RS232 connection

Hello,

 

   My purpose is to send an U-boot.srec file into Spartan 3E-500 Starter Board through Windows Hyperterminal, but I don't get! :( My objective is to use next instruction in windows environment: cat /tftpboot/u-boot.srec > /dev/ttyS0, but I don't get!...

 

   I tryed transfer a single file through Windows Hyperterminal, but the file never arrive there... :( Can you give me some help to jump my problem!?...

 

   Thanks

0 Kudos
0 Replies