cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
2,149 Views

Zynq-7000 AllProgrammable SoC:Embedded Design Tutorial-Uart not displaying anything on terminal

BH

 

Hello,

I have went through Zynq-7000 AllProgrammable SoC:Embedded Design Tutorial and except the first design(simply the Zynq 7000 processor), I can't get anything on the terminal of SDK or any other external terminal (Checked baudrate and enabled the UART1 in the processor).

What could cause this problem and how can I solve this?

 

Sincerally,

Haz88

0 Kudos
2 Replies
hbucher
Scholar
Scholar
2,118 Views
Registered: ‎03-22-2016

@Anonymous You are probably goofing on something very easy. Give us more info.

1. Windows or Linux?

2. Vivado version?

3. Board you are using?

 

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
0 Kudos
Anonymous
Not applicable
2,059 Views

BH

 

Hello hbucher,

 

I am using Windows platform, with Vivado 2015.4.1.

The board which the designs are implemented is the Z-turn from MYIR.

 

Waiting very much for your reply,

Haz88

0 Kudos