cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
502 Views
Registered: ‎05-10-2018

Zynq Quad-SPI boot question

Good morning.
Ask for good feedback.
I am using vivado 2017.4.
And I am using the XC7Z010CLG225-2.
Quad SPI Single using S25FL256SDPBHICI0 product.
In the ZYNQ7 Processing System (5.5), I set the Quad SPI Single and the DDR PLL to 66MHz.
After creating bit file, I try to execute FSBL file and BIN file in program flash with SDK.
However, a 'FLASH OPERATION Failed' error occurs.
128M is possible with the same procedure.
Is there any other setting method when using 256M?
Thank you.

0 Kudos
1 Reply
Highlighted
Observer
Observer
437 Views
Registered: ‎05-09-2018

Hi,

You can click on the check box in the Program Flash wizard to check whether the erase operation is successful.

Try on SDK 2017.2 , and if nothing works, there is an alternative way to boot board through JTAG mode and write directly to QSPI.

 

 

Regards

mrm

0 Kudos