cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jorourke
Visitor
Visitor
2,139 Views
Registered: ‎02-10-2014

Zynq ZC706 as USB device

How can I setup the zc706 to be detected by a host pc as a usb device? I want to be able to produce data in the PL/PS and then have the PS package it up so that it can then be seen/read from a host pc connected via usb

0 Kudos
2 Replies
balkris
Xilinx Employee
Xilinx Employee
995 Views
Registered: ‎08-01-2008

The below link documents can gouide you

http://www.xilinx.com/support/documentation/boards_and_kits/zc706/ug954-zc706-eval-board-xc7z045-ap-soc.pdf -HW environment details

http://www.xilinx.com/support/documentation/boards_and_kits/zc706/14_5/ug961-zc706-GSG.pdf - Contains self test details

 

https://forums.xilinx.com/t5/Xilinx-Boards-and-Kits/USB-to-UART-Bridge-on-zc706-EB/td-p/689376

http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm -- Contains all ZC706 board related DOCS & files

Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos
jeffdaq
Explorer
Explorer
982 Views
Registered: ‎11-22-2015

 

I used this page to try mine out as mass storage and RNDIS.

 

http://www.wiki.xilinx.com/Zynq+Linux+USB+Device+Driver

 

jeff

0 Kudos