11-10-2016 07:35 PM
I am using a zcu102 board, when using the pre-built linux image from http://www.wiki.xilinx.com/Zynq+2016.2+Release, I found the PCIE doesn't work.
I also git checkout latest linux source from https://github.com/Xilinx/linux-xlnx, and still failed to probe PCIE.
Below is the env settings:
uboot: U-Boot 2016.01 (Jun 10 2016 - 07:24:48 +0530) Xilinx ZynqMP ZCU102
kernel: latest linux source from github
I attach the boot log file, we can see in the boot period, there is no any output related with PCIE
11-10-2016 11:09 PM - edited 11-10-2016 11:13 PM
Please check whether the information in the below AR helps
11-13-2016 05:31 PM
11-14-2016 10:28 PM
I can't answer your PCIe question but just so you know petalinux is just the build/configuration system. It could build linux from any git repo but obviously most people use the Xilinx repo.