UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
4,014 Views
Registered: ‎02-05-2013

2 AXI_DMAs not working in design

Hi,

     Im working on KC705 board. Im running a TFTP server on the fpga with microblaze processor. My aim is to get stream data from ISE to DDR3 through a custom peripheral and DMA and then send the data as a file to a PC using TFTP server. So my system has 2 DMAs ,one for the custom peripheral and other for the temac. When the code is executed my server doesnt work .Im not able to ping my board(server). However, If I remove the other dma for custom peripheral Im able to ping my server. Any work-around for using 2 DMAs in my system? Kindly suggest.

 

Regards

San.

0 Kudos