UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
214 Views
Registered: ‎05-18-2018

Accessing an apparently inaccessible MIO pin

 

I have a Zynq US+ (xazu2eg-sfva625-1-i) on a PCB that's already manufactured, and I am trying to detect an interrupt from an I2C realtime clock coming in on G13/PS_MIO27.

On the physical board, this signal is running to the Zynq US+ IC's package pin G13. In the Block Diagram editor, I have an input port named RTC_IRQ  that is routed to the PS's pl_ps_irq0 register. I want to tie these together.

However, in the I/O Ports panel of the RTL Analysis Elaborated Design screen, package pin G13, which corresponds to MIO27, cannot be tied to my RTC_IRQ port.

1) Can this particular package pin be tied to a fabric port and run to the PS block's PL-to-PS interrupt input?

2) If not, is this pin directly readable by firmware/the ARM cores?

Thanks.

mio_availability.png
mio_availability_2.png
0 Kudos