UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor grosdode
Visitor
8,055 Views
Registered: ‎01-26-2016

Add interrupt to echo example of LWIP

I'd try to add an Interrupt PL->PS to my Zynq while using the echo example of LWIP.
But the Interrupts from LWIP and my Interrupt kill each other. Had someone did something similar? Or a doc that helps

0 Kudos
7 Replies
Xilinx Employee
Xilinx Employee
8,044 Views
Registered: ‎08-02-2007

Re: Add interrupt to echo example of LWIP

hi,

 

just to rule out if this is an LWIP issue or an interrupt from the IP, can you test the hardware without using LWIP?

 

if still the LWIP example fails, are you using Xilkernel as OS?

 

--hs

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Visitor grosdode
Visitor
8,042 Views
Registered: ‎01-26-2016

Re: Add interrupt to echo example of LWIP

LWIP (modified) echo example works fine (without OS, I think) but if I add my custom Interrupt the ethernet connection fail (first init LWIP then custom interrupt) or custom interrupt fail (first init custom interrupt then LWIP)

0 Kudos
Visitor grosdode
Visitor
8,039 Views
Registered: ‎01-26-2016

Re: Add interrupt to echo example of LWIP

LWIP config its interrupts with this file but I don't know how to merge my custom interrupt to it.

0 Kudos
Highlighted
Visitor gy343279479
Visitor
6,800 Views
Registered: ‎07-26-2015

Re: Add interrupt to echo example of LWIP

hello~ is your problem solved?

0 Kudos
Observer shirley_yang
Observer
5,748 Views
Registered: ‎05-12-2016

Re: Add interrupt to echo example of LWIP

Hi,have u found the solution?

0 Kudos
887 Views
Registered: ‎11-22-2016

Re: Add interrupt to echo example of LWIP

Has anybody found a solution for this?

0 Kudos
Xilinx Employee
Xilinx Employee
868 Views
Registered: ‎10-30-2017

Re: Add interrupt to echo example of LWIP

Hi,

 

you should initialize both the interrupts at sane point.

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.

0 Kudos