UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
236 Views
Registered: ‎01-13-2016

Addressing for CDMA in PS

I want to set up a CDMA such that when I get certain packets over Ethernet I move them to a BRAM in PL.

 

I have the CDMA code set up on the ARM of my Zynq, and using that to transfer data works fine sometimes.

 

However, when I get a packet from ethernet using LWIP, if I take the pointer to the payload of the received message, it is some high address, like 0xEA000025.

 

The CDMA is connected to the HP port on my ARM, but that only gives it access to 0x00000000-0x3FFFFFFF.

Is the address 0xEA000025 correct, or do I need some kind of translation to get the correct physical memory address?

Is

0 Kudos