UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer cascade99
Observer
5,366 Views
Registered: ‎12-05-2015

Erase flash failed

Jump to solution

Hi,

I was using SDK2016.2 to "Programing Flash" but got error:

CortexA9 Processor Configuration
-------------------------------------
Version.............................0x00000003
User ID.............................0x00000000
No of PC Breakpoints................6
No of Addr/Data Watchpoints.........4
Processor Reset .... DONE
SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
Performing Erase Operation...
ERROR: attempting erase past flash size (0x1000000)
Erase Operation failed.
INFO: [Xicom 50-44] Elapsed time = 0 sec.

ERROR: Flash Operation Failed

Anybody know why? I checked the cable, looks fine.

Thanks

 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
9,587 Views
Registered: ‎10-24-2013

Re: Erase flash failed

Jump to solution

Hi @cascade99

Please check where the similar topic is discussed.

https://forums.xilinx.com/t5/Embedded-Linux/Unable-to-boot-petalinux-from-flash/td-p/555692

Thanks,Vijay
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.

View solution in original post

0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
9,588 Views
Registered: ‎10-24-2013

Re: Erase flash failed

Jump to solution

Hi @cascade99

Please check where the similar topic is discussed.

https://forums.xilinx.com/t5/Embedded-Linux/Unable-to-boot-petalinux-from-flash/td-p/555692

Thanks,Vijay
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.

View solution in original post

0 Kudos
Observer cascade99
Observer
5,266 Views
Registered: ‎12-05-2015

Re: Erase flash failed

Jump to solution

It turned out that the my .bin file is too big for single QSPI, i need set to dual parallel when I do Program Flash.

 

Thanks