UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
256 Views
Registered: ‎09-28-2012

How to access the old version of document

Hi all 

I would like to know how to access the old version of document, ug585 for vivado 2016.2 specifically. 

https://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf

I could not find any link or information about how to access it. 

please show me clue.

thanks in advance

Sincerely

amistad

0 Kudos
5 Replies
Moderator
Moderator
225 Views
Registered: ‎11-09-2015

Re: How to access the old version of document

Hi @amistad 

For some document, if you seach on Xilinx, you will have the option to find different version of the UG/PG:UG900.JPG

 

It makes sense because they are specific to a vivado version because some commands are changing.

For the UG585, it does not makes sense to keep the previous version of the document. The document describe the silicon, which is not changing between versions. So each version will only be clarification or errors/typos fixed. So the latest version is always what you should look at.

Regards

 

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Contributor
Contributor
219 Views
Registered: ‎09-28-2012

Re: How to access the old version of document

hi @florentw 

the document I need is UG585, and the search result shows there is no "see all versions" as what you show in the replication, UG900. 

aaa.jpg

 

 

 

 

 

 

 

So, how to access the old version of UG858? 

thanks 

amistad

0 Kudos
Moderator
Moderator
212 Views
Registered: ‎11-09-2015

Re: How to access the old version of document

Hi @amistad 

Please read my previous reply up to the end...


For the UG585, it does not makes sense to keep the previous version of the document. The document describe the silicon, which is not changing between versions. So each version will only be clarification or errors/typos fixed. So the latest version is always what you should look at.

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Contributor
Contributor
206 Views
Registered: ‎09-28-2012

Re: How to access the old version of document

hi @florentw 

I encountered an issue for PS-SPI, which configuration does not work correctly as described in the UG585. 

cs2 is not pull-low when I set the CR for PS-SPI according to the UG585 while the cs0 and cs1 work correctly. 

I wounder if it is a XSDK version issue or something else. 

So, should I discuss this problem in another forum ?

thanks 

amistad

0 Kudos
Moderator
Moderator
190 Views
Registered: ‎11-09-2015

Re: How to access the old version of document

HI @amistad 

You might want to look of Answer Records or forums topics. You might find the answer.

My main recommendation would be to use the latest version of the tool ;)

Here is one AR you might want to look at: AR#58294

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos