UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer marchzhe
Observer
141 Views
Registered: ‎09-27-2016

Limit of Number of Slaves for the AXI_CDMA IP

Hello, I wonder if there is any limitation on the number of slave modules the AXI_CDMA IP can connect. 

This is the design in the block diagram:

Capture2.PNG

This is the display of the address editor console. It seems that the bram_ctrl_3 cannot be mapped. I have tried to remove one existing bram_ctrl (for example bram_ctrl_1) from the slave, then the bram_ctrl_3 can be mapped. My question is that is there a limit of number of slaves that the AXI_CDMI IP can drive?

Capture1.PNG

Thank you very much! 

0 Kudos