UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer wisnuk@w
Observer
337 Views
Registered: ‎01-13-2019

Microblaze mcs on Cutomized AXI IP Core

Jump to solution

i try build my own IP with AXI that runs microblaze mcs inside. my tutor say to me that we hace to build simple project to get the design hdl and try to copy it to my sheet project. than i look to my tutor IP there's something differents inside the hierarchy . pic 1 is my IP and second one is IP core that already mcs run inside. why i got different symbol . and i got this message when i try to associate .elf "no user accessible processors found for elf file association". someone help please

cotc1.png
cotc2.png
0 Kudos
1 Solution

Accepted Solutions
Observer wisnuk@w
Observer
250 Views
Registered: ‎01-13-2019

Re: Microblaze mcs on Cutomized AXI IP Core

Jump to solution
i already solve this by add a mcs microblaze once i associate .elf file i generate all need it. thank you for your response though

View solution in original post

0 Kudos
2 Replies
Moderator
Moderator
280 Views
Registered: ‎07-31-2012

Re: Microblaze mcs on Cutomized AXI IP Core

Jump to solution

Hi wisnuk@w ,

First screenshot shows that MCS source file during package might have missed that is the reason you see the IP is missing.Whereas, in second screenshot mcs is present in the source file list as .v file.

Regards

Praveen


-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Observer wisnuk@w
Observer
251 Views
Registered: ‎01-13-2019

Re: Microblaze mcs on Cutomized AXI IP Core

Jump to solution
i already solve this by add a mcs microblaze once i associate .elf file i generate all need it. thank you for your response though

View solution in original post

0 Kudos