UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor syemets_xil
Visitor
2,277 Views
Registered: ‎02-28-2013

PCIe root complex on FMC connector of ZC706 board

I wish use this FMC to root complex mezzanine board connected to ZC706 board FMC site.

http://www.xilinx.com/products/boards-and-kits/1-3Y8UXI.htm

Not all 8 lanes are required, 1 lane will be good, 2 lanes will be enough. 

 

Next, I wish connect a Virtex 7 board like this HTG-V7-PCIE-CXP-2000

http://www.hitechglobal.com/Boards/PCIE-CXP.htm

 

to the mezzanine PCIe connector.

 

Is the configuration mechanically, electricaly and logically valid? Is it possible to configure Zynq and Virtex on the boards to establish PCIe link?

Is there a simpler way to build Zynq(master)->PCIe->Virtex-7 V2000T(target) system based on commercially available development kits/boards?

 

Thanks!

 

 

0 Kudos