UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
3,269 Views
Registered: ‎06-15-2015

SAIF file generation for application running on microblaze

Hello All,

 

I have created a microblaze design using XPS and I run an application on this processor using the SDK. However, I need to capture the switching activity just like how it is done in vivado. Can anyone please help me in understanding how to capture the activity for microblaze?

0 Kudos
3 Replies
Highlighted
Explorer
Explorer
3,263 Views
Registered: ‎11-17-2015

回复: SAIF file generation for application running on microblaze

Run simulation with tools from Cadence or Synopsys? 

How often is SAIF file used for FPGA power analysis? 

 

0 Kudos
Xilinx Employee
Xilinx Employee
3,247 Views
Registered: ‎08-01-2008

回复: SAIF file generation for application running on microblaze

check these links
https://www.xilinx.com/support/answers/52632.html
https://www.xilinx.com/support/documentation/sw_manuals/xilinx11/ism_cl_saif.htm
https://www.xilinx.com/support/documentation/white_papers/wp307.pdf
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos
3,218 Views
Registered: ‎06-15-2015

Re: SAIF file generation for application running on microblaze

Thank u for reply lis_user and balkris.

@balkris- I have been using the same to generate saif for my other designs. But the instantiated microblaze in vivado doesn't have a tb and I m not sure how to load the memory files. If that worked then I could have easily generated the Saif. Do u knw any way to generate Saif through XPS? I tried loading the hdl simulator , linking my application elf file. But none of them give me the simulation that I need.

@lis_user microblaze being a soft processor of xilinx, it's a bit tricky to migrate this design to synopsys. In the past when I had to use microblaze in synopsys I used a similar processor called MBLITE. But here I am dealing only with microblaze.
0 Kudos