UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor eyyup_gun
Visitor
1,215 Views
Registered: ‎07-18-2017

Stopping Operation on SDK

I asked a question which is in https://forums.xilinx.com/t5/Welcome-Join/T%C4%B0ming-requirement-are-not-matched-for-xapp1287/m-p/779949#M46854 the link. I tried to do Run As instead of Debug As. But operation is failed again. Especially when operation flow came the step where "xil printf" command, there is an infinity loop.

 

This example design is support UART or another communication interface ?   

 

Because example design constrain is not connected UART pin of the ZC706 board.

 

Thanks. Best regards. 

0 Kudos