UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Scholar golson
Scholar
5,955 Views
Registered: ‎04-07-2008

Testing XAPP957 questions

Hi,
  I implemented the XAPP957 design on my ML505 board.  I have a lot of questions about how to test and configure the Test Application.
 
Among them is some times the DEMO test does not always capture packets in the rx fifo.  I have seen it catch maybe 10 sometimes when
I push the demo button.  And then Another time it may catch one and sometimes 0. 
 
Another question I have is that I try to send packets using the auto and watch packet traffic.  But the receiver counts these packets as packet
fragments and not captured packets.  I think I need to tell it the IP address of the receiver for it to recognize the packets as valid packets.
 
If this is so, How do I configure this.
 
Thank You,
  Gary Olson
 
0 Kudos