UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor satara
Visitor
252 Views
Registered: ‎09-12-2018

UART_1 MIO 48-49 with xuart_ps_intr_example

Is it possible to use the ZYBO Zync-7000 UART_1 on MIO 48..49 with the xuart_ps_intr_example? I want to take advantage of the uart-usb chip on the Zybo board.

0 Kudos
1 Reply
Scholar jg_bds
Scholar
243 Views
Registered: ‎02-01-2013

Re: UART_1 MIO 48-49 with xuart_ps_intr_example

 

That looks possible. Digilent has redacted page 7 of the ZYBO ,schematics, so it's hard to tell where the MIO48/49 UART pins go--but they don't appear to go anywhere else. You might need a particular Digilent driver to convert the USB port to a virtual COM port on your monitor computer. The easiest way to check is to wire-up the JTAG/UART port of the ZYBO to a USB port on your monitor computer, and see if the OS finds the driver for it, and creates a new COM port.

-Joe G.

 

0 Kudos