UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor quekca
Visitor
176 Views
Registered: ‎03-19-2019

ZC702 installing camera driver + connect camera to ethernet

Hi,

I have a ZC702 board, and a camera with a ethernet output. I prefer to communicate with the FPGA board without any OS.

1) Given that my computer and camera both requires 1 ethernet port each, if i use a FMC card with extra ethernet ports connected on the LPC connector, how do I receive/send data to the camera from my computer? ie, how does the FPGA knows to transfer/receive the data through the LPC connector to my computer?  Alternatively, a router can also be used but how does the computer communicate with the camera?

2) My camera requires GIGE driver to be installed to run. As such, is there any methods to install the driver on the board?  Is http://zedboard.org/sites/default/files/documentations/GSG-GEV-AES-Z7PZ-SVDK-G-v1_5.pdf applicable to ZC702?

Thanks in advance.

0 Kudos