UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
4,255 Views
Registered: ‎08-11-2010

Zynq Address Translation - Physical to Virtual

Hi,

 

I am working on ZC-706 board with vxWorks7 version.

The BSP that is provided from windriver does not have AXI ports (M_AXI_GP0, M_AXI_GP1) mapped in it.

The address range of the AXI ports is

0x40000000 to 0x7FFFFFFF,   0x80000000 to 0xBFFFFFFF.

 

The address mappings are given in a .dts file.

The similar kind of problem and solution is posted in the following link

http://forums.xilinx.com/t5/Embedded-Processor-System-Design/Zynq-Address-Translation-Physical-to-Virtual/m-p/312345#M7820

Probably the solution provided is for vxWorks 6.9.

 

How to add the AXI ports in .dts file

I am attaching the windriver provided .dts file in the attachment.

Please help me where and how to add.

 

Please help  me, Thanks in advance -- sriram

 

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
4,161 Views
Registered: ‎08-02-2011

Re: Zynq Address Translation - Physical to Virtual

Have you seen the wiki which explains how to create a DTS?
http://www.wiki.xilinx.com/Build+Device+Tree+Blob
www.xilinx.com
0 Kudos