UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
232 Views
Registered: ‎07-27-2010

programming the micro blaze

Hi 

I have just started working with microblaze

I have a few questions

1- Can microblaze be programmed without generating bitstream

2- If not then how the constraint are defined (as bitstream is not generated without xdc file)

Best Regards

Uzmeed

 

Tags (1)
0 Kudos
1 Reply
Moderator
Moderator
188 Views
Registered: ‎09-12-2007

Re: programming the micro blaze

If the application is to be run from LMB BRAM, or AXI BRAM, then the bitstream would need to be programmed.

All Xilinx IP are delivered with the XDC. Only the Clocks, and Resets are needed to be handled by the user.

 

 

0 Kudos