12-18-2014 08:18 PM
we are run a code on zc702 board, we need the sdl library support for execution time, how can we add sdl library for the execution
12-18-2014 09:18 PM
To add Libraries and Library paths in SDK, please refer to the link below:
The eclipse based tutorial below will also help:
12-18-2014 10:04 PM
Thanks for reply
i think adding library paths will work, when we run sdl or any library in the operating system,
but i am working on petalinux which is on sdcard,
tell me whether i need to compile library with arm linux gcc compiler and place in sdcard to provide path for project or
do i need to do any thing for compilation..
please suggest me
12-18-2014 10:30 PM - edited 12-18-2014 10:51 PM
Are these libraries already compiled?
If you have pre-compiled libraries, you can check the following discussion:
If not, you will need to compile these libraries using 'arm-xilinx-linux-gnueabi' toolchain. I have attached a document that describes the procedure to create a shared object file (*.so) using SDK.
You can also create the libraries in petalinux using petalinux-create command