UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
1,259 Views
Registered: ‎04-21-2017

zedboard bus

Jump to solution

Hello,

I wonder if zedboard buses have standard width or I can have whatever width I need.

regards

0 Kudos
1 Solution

Accepted Solutions
Scholar austin
Scholar
2,224 Views
Registered: ‎02-27-2008

Re: zedboard bus

Jump to solution

m,

 

If it within the Zynq component as the processor section, those are all 32 bit AXI buses.

 

If you are placing them in the programmable logic, they may be 8, 16, 32, 64, and even larger.

 

If you are trying to get off chip, the width is limited by the board design, and the pins available.

 

 

Austin Lesea
Principal Engineer
Xilinx San Jose

View solution in original post

1 Reply
Scholar austin
Scholar
2,225 Views
Registered: ‎02-27-2008

Re: zedboard bus

Jump to solution

m,

 

If it within the Zynq component as the processor section, those are all 32 bit AXI buses.

 

If you are placing them in the programmable logic, they may be 8, 16, 32, 64, and even larger.

 

If you are trying to get off chip, the width is limited by the board design, and the pins available.

 

 

Austin Lesea
Principal Engineer
Xilinx San Jose

View solution in original post