UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer fpga2017
Observer
1,282 Views
Registered: ‎03-27-2018

Emulation-HW failed for KCU1500 board

Jump to solution

Hello,

 

I'm trying to use the KCU1500 board, the board has been installed in my computer successfully, and I'm running the very simple example of vadd following UG1021, I had run Emulation-SW successfully, but when I ran Emulation-HW, I met this problem:

 

INFO: [VPL 60-839] Read in kernel information from file 'kernel_info.dat'.
INFO: [VPL 60-895]    Target platform: /home/gg/Xilinx/SDx/2017.4/platforms/xilinx_kcu1500_dynamic_5_0/xilinx_kcu1500_dynamic_5_0.xpfm
INFO: [VPL 60-423]   Target device: xilinx_kcu1500_dynamic_5_0
INFO: [VPL 60-251]   Hardware accelerator integration...
ERROR: [VPL 60-399] vivado failed, please see log file for detail: '/home/gg/workspace/ug1021_20180725/vadd/Emulation-HW/_xocc_link_krnl_vadd/_vpl/ipi/vivado.log'
ERROR: [VPL 60-806] Failed to finish platform linker
ERROR: [XOCC 60-398] vpl failed
ERROR: [XOCC 60-626] Kernel link failed to complete
ERROR: [XOCC 60-703] Failed to finish linking
makefile:80: recipe for target 'krnl_vadd.xclbin' failed
make: *** [krnl_vadd.xclbin] Error 1

 

Can anybody give me some suggestion? Thank you very much!

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
1,447 Views
Registered: ‎07-16-2008

回复: Re: Re: Emulation-HW failed for KCU1500 board

Jump to solution

SDx 2017.4 supports the following OS:

• Windows 7 and 7 SP1 Professional (64-bit) (SDSoC only)
• Windows 10 Professional (64-bit) (SDSoC only)
• Linux Support
○ Red Hat Enterprise Workstation/Server 7.2-7.3 (64-bit)
○ Red Hat Enterprise Workstation 6.7, and 6.8 (SDSoC only)
○ Red Hat Enterprise Workstation 6.9 (64-bit)
○ CentOS 6.9, CentOS 7.3 (64-bit) (SDAccel)
○ Ubuntu Linux 16.04.2 LTS (64-bit)

 

Would you please try on a supported Ubuntu version?

 

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
10 Replies
Xilinx Employee
Xilinx Employee
1,246 Views
Registered: ‎07-16-2008

回复: Emulation-HW failed for KCU1500 board

Jump to solution

Any more details in

'/home/gg/workspace/ug1021_20180725/vadd/EmulationHW/_xocc_link_krnl_vadd/_vpl/ipi/vivado.log'?

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Observer fpga2017
Observer
1,242 Views
Registered: ‎03-27-2018

Re: Emulation-HW failed for KCU1500 board

Jump to solution

I'm attaching it, please check, thank you very much!

0 Kudos
Xilinx Employee
Xilinx Employee
1,211 Views
Registered: ‎07-16-2008

回复: Re: Emulation-HW failed for KCU1500 board

Jump to solution

The following error is seen from the log.

/usr/bin/ld: xsim.dir/emu_wrapper_behav/obj/xsim_6.lnx64.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status

 

What OS is the tool running on?

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Observer fpga2017
Observer
1,196 Views
Registered: ‎03-27-2018

Re: Re: Emulation-HW failed for KCU1500 board

Jump to solution

I'm using Ubuntu 4.13, the complete information is here:

 

Linux version 4.13.0-46-generic (buildd@lcy01-amd64-002) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #51-Ubuntu SMP Tue Jun 12 12:36:29 UTC 2018

 

Thank you very much!

0 Kudos
Xilinx Employee
Xilinx Employee
1,448 Views
Registered: ‎07-16-2008

回复: Re: Re: Emulation-HW failed for KCU1500 board

Jump to solution

SDx 2017.4 supports the following OS:

• Windows 7 and 7 SP1 Professional (64-bit) (SDSoC only)
• Windows 10 Professional (64-bit) (SDSoC only)
• Linux Support
○ Red Hat Enterprise Workstation/Server 7.2-7.3 (64-bit)
○ Red Hat Enterprise Workstation 6.7, and 6.8 (SDSoC only)
○ Red Hat Enterprise Workstation 6.9 (64-bit)
○ CentOS 6.9, CentOS 7.3 (64-bit) (SDAccel)
○ Ubuntu Linux 16.04.2 LTS (64-bit)

 

Would you please try on a supported Ubuntu version?

 

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Observer fpga2017
Observer
1,174 Views
Registered: ‎03-27-2018

Re: Re: Re: Emulation-HW failed for KCU1500 board

Jump to solution

Good suggestion, I'll do it, thanks.

0 Kudos
Observer fpga2017
Observer
1,157 Views
Registered: ‎03-27-2018

Re: Re: Re: Emulation-HW failed for KCU1500 board

Jump to solution

I reinstalled the OS and it works! Thanks a lot!

 

I still have one more question, in ug1238, it requires about 30 packages (such as: ocl-icd-libopencl1, opencl-headers, ... etc.) installed by 'apt-get install' command, so do I have to install these packages one by one? Or it will be installed automatically when I install the OS? Thanks!

0 Kudos
Moderator
Moderator
1,152 Views
Registered: ‎11-04-2010

Re: Re: Re: Re: Emulation-HW failed for KCU1500 board

Jump to solution
Hi, @fpga2017 ,
Please start a new thread for the new question and close the resolved thread.
-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Observer fpga2017
Observer
1,121 Views
Registered: ‎03-27-2018

Re: Re: Re: Re: Emulation-HW failed for KCU1500 board

Jump to solution

OK.

0 Kudos
Moderator
Moderator
648 Views
Registered: ‎11-04-2010

Re: Re: Re: Re: Emulation-HW failed for KCU1500 board

Jump to solution
Hi, @fpga2017 ,
Thank you for your cooperation.
-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos