04-20-2017 06:29 PM - edited 04-20-2017 06:32 PM
In nimbix platform, the device ku115 has changed from 3.2 to 3.3
The default make command " make TARGETS=sw_emu all " failed due to the device change.
I tried to change the device type by using this command:
emconfigutil --xdevice 'xilinx:adm-pcie-ku3:2ddr-xpr:3.3' --nd 1
make TARGETS=sw_emu all
It still failed.
Can anyone help?
04-20-2017 07:43 PM
If your are using following gitRepo, so I would suggest to pull the new changes from GitRepo. It has been updated for new Devices.
Or, you can directly default Device in your board.mk (sample)
Or you can change the default DSA while running make command:
make TARGETS=sw_emu all DEVICES=xilinx:xil-accel-rd-ku115:4ddr-xpr:3.3
If you have some Device filtering in your Example Makefile ( Couple of GitHub Example has this so good to check), you should update Example Makefile to list new DSA as in supported list. Search for *_DEVICES and update it.
04-20-2017 11:50 PM - edited 04-20-2017 11:55 PM
thanks for your help.
I downloaded the latest version from Git. Now the device is correct.
Please see the detailed error msg and the vivado log file is attached as well.
What could be the problem?