UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

About Custom Device Using the reVision Stack

Reply
Highlighted
Observer
Posts: 15
Registered: ‎03-27-2017

About Custom Device Using the reVision Stack

HI, Everyone, I am trying to use the revision in an custom Zynq-7000 board, but from the toturial, There is only suggested boards' platform zip file, is that say i can not using the reVision Stack, OR is there posbility to custom myself's platform files,

 

thanks

Contributor
Posts: 44
Registered: ‎04-24-2012

Re: About Custom Device Using the reVision Stack

Hi @fengwuxxx,

You will not be able to run live demos (opticalflow, stereo vision, etc) because they use the VCU inside Zynq UltraScale+ devices only, for the video pipeline afaik. You can try to compile non live_io demos with Zynq-7000 devices.

I suggest you to download any .zip of reVISION and try to get familiar with it, before trying on the Zynq-7000, but as I said, non_live IO demos only.

/* Don't forget to give kudos and/or accept as a solution */
Contributor
Posts: 46
Registered: ‎10-21-2015

Re: About Custom Device Using the reVision Stack

live demos don't need VCU. 

Their filters are implemented using xfopencv  in PL and using opencv in PS