UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor morkc
Visitor
226 Views
Registered: ‎10-31-2018

Looking For a Way To Build reVISION Stack From The Command Line

I'm looking for a way to build a project using reVISION stack's opticalflow from the command line. I know how to build the project from the SDSoC development environment, but I don't quite understand yet how to do the same thing from the command line. What command line command and options should I be using?

Also, if you know of a website that can walk me through the procedure in an easy-to-understand manner, please post the link.

As far as I can see from the Xilinx Software Command-Line Tool (XSCT) page on the website, it seems possible to do everything from the command line, but I don't understand specifically how to carry it out.
https://www.xilinx.com/html_docs/xilinx2018_2/SDK_Doc/xsct/intro/xsct_introduction.html
https://www.xilinx.com/html_docs/xilinx2018_2/SDK_Doc/xsct/use_cases/xsct_howtoruntclscriptfiles.html

 

I'm using:
SDSoC,
Xilinx SDx v2018.2 (64-bit)
SW Build 2258646

Please let me know if there's any information that you need from me to better answer my question.
Thanks in advance!

0 Kudos