05-14-2018 09:30 AM
Hi,
I have this error when I run step 8 in this example:
http://www.wiki.xilinx.com/reVISION+Getting+Started+Guide+2017.4
I am using the SDSoC 2017.4 to open the dsa file on this project
open_dsa C:/XL/zcu102_es2_rv_ss/hw/zcu102_es2_rv_ss.dsa
But the error is:
ERROR: [Common 17-94] Failed to create file C:/Users/Usersname/AppData/Roaming/Xilinx/Vivado/.Xil/Vivado-200-WGC1W7C92GP32/zcu102_es2_rv_ss_2/prj/sources_1/bd/zcu102_es2_rv_ss/ip/zcu102_es2_rv_ss_vid_phy_controller_0_0/hdl/src/verilog/zcu102_es2_rv_ss_vid_phy_controller_0_0_gtwrapper_gthe4_common_wrapper.v.
Do you know why this happens? Plase give me the hints, appreciate so much
Chinh Nguyen
05-14-2018 07:42 PM
05-15-2018 07:27 AM
Thank you for your comments,
Yes in chapter 8
I tried to "cd" to working directory but the error is the same, don't know why it generate the file at C:/Users/username/AppData/Roaming/Xilinx/Vivado/.Xil/Vivado-200-WGC1W7C92GP32/zcu102_es2_rv_ss_4/prj/sources_1/bd/zcu102_es2_rv_ss/ip/zcu102_es2_rv_ss_vid_phy_controller_0_0/...
Do I need to set up the environment variables or something like that ?
Am I able to see the PS/PL configuration in case I can open this "dsa" file
Thank you
05-18-2018 10:21 AM
12-12-2018 12:59 AM
07-07-2019 09:45 PM
A similar error message pop out to me recently.
I solved the problem simply by changing the working directory of Vivado to an external HDD.
Maybe it can not be activated from the same HDD where the OS is installed?