UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer c0ff331993
Observer
148 Views
Registered: ‎01-17-2019

Re-building ZCU104-rv-ss-2017.4 Optical Flow on SDSOC

Hi,

I am trying to re-build the application optical flow with the downloaded file from https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841993/reVISION+Getting+Started+Guide+2017.4+rev2

I am using ZCU104-rv-ss-2017.4

I setup the SDSOC environment with the following guide: https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841993/reVISION+Getting+Started+Guide+2017.4+rev2

I am using SDSOC 2017.4 windows version.

I click 'build all' on my optical flow project.

The process is stuck at 26% and the log shows "IP Hardware acceleration". This process has been more than 6 hours.

Did anyone face this? or is there an estimate time to build this optical flow application?

Thanks

Tags (2)
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
95 Views
Registered: ‎08-20-2018

Re: Re-building ZCU104-rv-ss-2017.4 Optical Flow on SDSOC

Hi @c0ff331993 

Are you still facing this issue?

I have not seen this issue before.

Please migrate to 2018.3 reVISION and SDSoC if possible.

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/Docs/software-tools-system-requirements.md

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos